Gun Smithing
THESE ARE SOME BASIC GUN SMITHING PRICES! THESE ARE SUBJECT TO
CHANGE WITH OUT NOTICE, AND MAY NOT BE THE EXACT THESE ARE BASED
ON SIMPLE AVERAGE JOBS, THE PRICE MAY VARY DEPENDING ON THE JOB,
THE LABOR INVOLVED, & THE PARTS (IF ANY) REQUIRED TO DO THE JOB. FOR
MORE INFORMATION PLEASE CONTACT US.
CHANGE WITH OUT NOTICE, AND MAY NOT BE THE EXACT THESE ARE BASED
ON SIMPLE AVERAGE JOBS, THE PRICE MAY VARY DEPENDING ON THE JOB,
THE LABOR INVOLVED, & THE PARTS (IF ANY) REQUIRED TO DO THE JOB. FOR
MORE INFORMATION PLEASE CONTACT US.
GENERAL SHOP LABOR PER MAN HOUR $35.00
PARTS CUSTOM MADE FOR OLD/OBSOLETE GUNS POR
CLEAN-OIL-INSPECTION CUSTOMERS GUN $35.00
MINIMUM CHARGE ANY GUN, ANY REPAIR $25.00
METAL FINISHING
BEAD BLAST MATTE BLUE $165.00
STANDARD FACTORY FINISH BLUE $ 165.00
HIGH POLISH BLUE $185.00
PARKERIZING $165.00
SATIN ELECTROLESS NICKEL PLATE HANDGUNS $215.00
RUST BLUE DOUBLE BARRELS (BARRELS ONLY) $250.00
RUST BLUE DOUBLE GUN COMPLETE $295.00
ALL OTHER METAL FINISHING POR
SIGHT WORK (LABOR ONLY)
SIGHT IN CUSTOMER GUN (AMMO EXTRA) $25.00
BORE SIGHT CUSTOMER GUN $10.00
PATTERN SHOTGUN (AMMO EXTRA) $25.00 MIN
DRILL AND TAP BARREL OR RECEIVER (PER HOLE) $10.00
DRILL AND TAP HARDENED RECEIVER (MAUSER)
(PER HOLE) $15.00
MILL DOVETAIL IN BARREL $35.00
INSTALL FRONT SIGHT RAMP (SCREW-ON TYPE) $35.00
INSTALL FRONT SIGHT RAMP (SWEAT-ON TYPE) $50.00
CUSTOM FIT WEAVER BASES TO ODD SIZED GUNS $40.00
INSTALL FRONT BEAD ON SHOTGUN $25.00
INSTALL MIDDLE BEAD ON SHOTGUN $25.00
DRILL, TAP AND INSTALL EITHER OF THE ABOVE $35.00
INSTALL RECEIVER SIGHTS (GUN DRILLED AND TAPPED)
$25.00
DRILL AND TAP FOR RECEIVER SIGHTS $50.00
MOUNT SCOPE ON RIFLE OR SHOTGUN
GUN DRILLED AND TAPPED $35.00
SOLDER ON CANTILEVER MOUNT $75.00
INSTALL 2 LIGHT RODS IN REAR SIGHT $30.00
INSTALL 1 LIGHT ROD IN FRONT SIGHT $25.00
PARTS CUSTOM MADE FOR OLD/OBSOLETE GUNS POR
CLEAN-OIL-INSPECTION CUSTOMERS GUN $35.00
MINIMUM CHARGE ANY GUN, ANY REPAIR $25.00
METAL FINISHING
BEAD BLAST MATTE BLUE $165.00
STANDARD FACTORY FINISH BLUE $ 165.00
HIGH POLISH BLUE $185.00
PARKERIZING $165.00
SATIN ELECTROLESS NICKEL PLATE HANDGUNS $215.00
RUST BLUE DOUBLE BARRELS (BARRELS ONLY) $250.00
RUST BLUE DOUBLE GUN COMPLETE $295.00
ALL OTHER METAL FINISHING POR
SIGHT WORK (LABOR ONLY)
SIGHT IN CUSTOMER GUN (AMMO EXTRA) $25.00
BORE SIGHT CUSTOMER GUN $10.00
PATTERN SHOTGUN (AMMO EXTRA) $25.00 MIN
DRILL AND TAP BARREL OR RECEIVER (PER HOLE) $10.00
DRILL AND TAP HARDENED RECEIVER (MAUSER)
(PER HOLE) $15.00
MILL DOVETAIL IN BARREL $35.00
INSTALL FRONT SIGHT RAMP (SCREW-ON TYPE) $35.00
INSTALL FRONT SIGHT RAMP (SWEAT-ON TYPE) $50.00
CUSTOM FIT WEAVER BASES TO ODD SIZED GUNS $40.00
INSTALL FRONT BEAD ON SHOTGUN $25.00
INSTALL MIDDLE BEAD ON SHOTGUN $25.00
DRILL, TAP AND INSTALL EITHER OF THE ABOVE $35.00
INSTALL RECEIVER SIGHTS (GUN DRILLED AND TAPPED)
$25.00
DRILL AND TAP FOR RECEIVER SIGHTS $50.00
MOUNT SCOPE ON RIFLE OR SHOTGUN
GUN DRILLED AND TAPPED $35.00
SOLDER ON CANTILEVER MOUNT $75.00
INSTALL 2 LIGHT RODS IN REAR SIGHT $30.00
INSTALL 1 LIGHT ROD IN FRONT SIGHT $25.00
 |
 |
 |
GENERAL BARREL AND ACTION WORK (RIFLES)
(LABOR ONLY)
TEST FIRE CUSTOMER GUN FOR FUNCTION ONLY
(DOES NOT INCLUDE AMMO)
CHECK HEAD SPACE
CHECK FIRING PIN PROTRUSION
MAKE CHAMBER CAST
INSTALL SAKO STYLE EXTRACTOR IN REM. 700 + PARTS
REMOVE FIRED STUCK CASE FROM CHAMBER
REMOVE LIVE ROUND FROM CHAMBER
REMOVE OBSTRUCTION FROM CHAMBER/BARREL
STRAIGHTEN-ADJUST BARREL
INSTALL BARREL LINER (22CAL)
INCLUDES LINER CHAMBER AND CROWN
CUT AND CROWN BARREL (RIFLE, SHOTGUN, PISTOL)
TURN NEW BARREL FROM BLANK (CONTOUR ONLY)
THREAD-CHAMBER AND HEAD SPACE NEW ROUND
BARREL
THREAD CHAMBER AND HEAD SPACE NEW OCTAGON
BARREL
FLUTE RIFLE BARREL
FLUTE BOLT
SKELETONIZE BOLT HANDLE
INSTALL PRE-THREADED AND CHAMBER BARREL
LAP BOLT LUGS
TRUE-UP RECEIVER
FORGE BOLT HANDLE FOR LOW SCOPE MOUNTING
WELDING ON NEW BOLT HANDLE
MAKE AND INSTALL FLAT SPRING
MAKE AND INSTALL "V" SPRING
INSTALL MARK II SAFETIES
INSTALLING ALL OTHER SAFETIES
INSTALL TRIGGERS (TIMNEY-DAYTON TRAISTER TYPE)
INSTALL SET TRIGGERS (SINGLE OR DOUBLE)
INSTALL MUZZLE BRAKE
MUZZLE CAP CM
MUZZLE CAP S. STEEL
ADJUST AND TUNE TRIGGERS
TRUE OR OPEN UP BOLT FACE
SET BARREL BACK AND RE CHAMBER SAME CARTRIDGE
EXTRACTOR SLOTS IF REQ'D.
(LABOR ONLY)
TEST FIRE CUSTOMER GUN FOR FUNCTION ONLY
(DOES NOT INCLUDE AMMO)
CHECK HEAD SPACE
CHECK FIRING PIN PROTRUSION
MAKE CHAMBER CAST
INSTALL SAKO STYLE EXTRACTOR IN REM. 700 + PARTS
REMOVE FIRED STUCK CASE FROM CHAMBER
REMOVE LIVE ROUND FROM CHAMBER
REMOVE OBSTRUCTION FROM CHAMBER/BARREL
STRAIGHTEN-ADJUST BARREL
INSTALL BARREL LINER (22CAL)
INCLUDES LINER CHAMBER AND CROWN
CUT AND CROWN BARREL (RIFLE, SHOTGUN, PISTOL)
TURN NEW BARREL FROM BLANK (CONTOUR ONLY)
THREAD-CHAMBER AND HEAD SPACE NEW ROUND
BARREL
THREAD CHAMBER AND HEAD SPACE NEW OCTAGON
BARREL
FLUTE RIFLE BARREL
FLUTE BOLT
SKELETONIZE BOLT HANDLE
INSTALL PRE-THREADED AND CHAMBER BARREL
LAP BOLT LUGS
TRUE-UP RECEIVER
FORGE BOLT HANDLE FOR LOW SCOPE MOUNTING
WELDING ON NEW BOLT HANDLE
MAKE AND INSTALL FLAT SPRING
MAKE AND INSTALL "V" SPRING
INSTALL MARK II SAFETIES
INSTALLING ALL OTHER SAFETIES
INSTALL TRIGGERS (TIMNEY-DAYTON TRAISTER TYPE)
INSTALL SET TRIGGERS (SINGLE OR DOUBLE)
INSTALL MUZZLE BRAKE
MUZZLE CAP CM
MUZZLE CAP S. STEEL
ADJUST AND TUNE TRIGGERS
TRUE OR OPEN UP BOLT FACE
SET BARREL BACK AND RE CHAMBER SAME CARTRIDGE
EXTRACTOR SLOTS IF REQ'D.
$15.00
$10.00
$10.00
$35.00
$100.00
$45.00
$80.00
$50.00+UP
$50.00+UP
$130.00
$35.00
$125.00
$135.00
$150.00
$150.00
$75.00
$50.00
$125.00
$55.00
$35.00
$60.00
$90.00
$50.00
$100.00
$35.00
POR
$45.00
$125.00
$75.00
$35.00
$40.00
$45.00
$35.00
$125.00
$25.00 PER CUT
$10.00
$10.00
$35.00
$100.00
$45.00
$80.00
$50.00+UP
$50.00+UP
$130.00
$35.00
$125.00
$135.00
$150.00
$150.00
$75.00
$50.00
$125.00
$55.00
$35.00
$60.00
$90.00
$50.00
$100.00
$35.00
POR
$45.00
$125.00
$75.00
$35.00
$40.00
$45.00
$35.00
$125.00
$25.00 PER CUT
SHOTGUN WORK (LABOR ONLY)
LENGTHEN FORCING CONE (PER BARREL)
RESOLDER FOREND LUG
RESOLDER VENT RIB (DOES NOT INCLUDE BLUING)
OPENING UP CHOKE IN BARREL (PER-BARREL)
RAISING DENT IN BARREL
POLISH CHAMBER AND BORE (PER-BARREL)
INSTALL SCREW IN CHOKE TUBES
ONE BARREL
DOUBLE BARREL
CUT OFF SHOTGUN BARREL (IF REQD. FOR CHOKES)
INSTALL ADJUSTABLE CHOKE (POLY-CHOKE ETC.)
MAKE NEW HINGE PIN (MOST GUNS)
LENGTHEN SHOTGUN CHAMBER (PER BARREL)
CHANGE SAFETY FROM RIGHT HAND TO LEFT HAND
CONVERT BROWNING A-5 FROM 29/16 TO 23/4
RESOLDER GAS PORT ON SHOTGUN BARREL
RESTAKE SHELL STOP-REMINGTON 11-87, 1100, 870
ALL OTHER SHOTGUN WORK
HANDGUN WORK (LABOR ONLY)
.CHAMBER REVOLVER BARREL
CHAMBER REVOLVER CYLINDER
REVOLVER ACTION JOB
REBARREL REVOLVER (WITH NEW FACTORY
BARREL)
INSTALL NEW CYLINDER
STRAIGHTEN CRANE ON REVOLVER
[REMOVE/MODIFY REVOLVER HAMMER SPUR
INSTALL DROP IN BEAVERTAIL SAFETY
'INSTALL TRIGGER
INSTALL DOVETAIL FRONT SIGHT
INSTALL MMC OR NOVAK REAR SIGHT
SEMI-AUTO PISTOL ACTION JOB
TIGHTEN SLIDE OF 1911 AUTO
FIT BARREL TO 1911 AUTO
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
BEVEL MAGAZINE WELL OF 1911 AUTO
OPEN AND MODIFY EJECTION PORT OF 1911 AUTO
SLIDE
THROAT. POLISH BARREL AND FEED RAMP OF 1911
FIT NEW TRIGGER TO 1911
FIT CUSTOM HAMMER TO 1911
MODIFY 1911 AUTO FRAME FOR BEAVER TAIL
MAGNA-PORT (STD 2 TRAPEZOID)
MAGNA PORT DUAL TRAPEZOID
OTHER HANDGUN WORK
LENGTHEN FORCING CONE (PER BARREL)
RESOLDER FOREND LUG
RESOLDER VENT RIB (DOES NOT INCLUDE BLUING)
OPENING UP CHOKE IN BARREL (PER-BARREL)
RAISING DENT IN BARREL
POLISH CHAMBER AND BORE (PER-BARREL)
INSTALL SCREW IN CHOKE TUBES
ONE BARREL
DOUBLE BARREL
CUT OFF SHOTGUN BARREL (IF REQD. FOR CHOKES)
INSTALL ADJUSTABLE CHOKE (POLY-CHOKE ETC.)
MAKE NEW HINGE PIN (MOST GUNS)
LENGTHEN SHOTGUN CHAMBER (PER BARREL)
CHANGE SAFETY FROM RIGHT HAND TO LEFT HAND
CONVERT BROWNING A-5 FROM 29/16 TO 23/4
RESOLDER GAS PORT ON SHOTGUN BARREL
RESTAKE SHELL STOP-REMINGTON 11-87, 1100, 870
ALL OTHER SHOTGUN WORK
HANDGUN WORK (LABOR ONLY)
.CHAMBER REVOLVER BARREL
CHAMBER REVOLVER CYLINDER
REVOLVER ACTION JOB
REBARREL REVOLVER (WITH NEW FACTORY
BARREL)
INSTALL NEW CYLINDER
STRAIGHTEN CRANE ON REVOLVER
[REMOVE/MODIFY REVOLVER HAMMER SPUR
INSTALL DROP IN BEAVERTAIL SAFETY
'INSTALL TRIGGER
INSTALL DOVETAIL FRONT SIGHT
INSTALL MMC OR NOVAK REAR SIGHT
SEMI-AUTO PISTOL ACTION JOB
TIGHTEN SLIDE OF 1911 AUTO
FIT BARREL TO 1911 AUTO
FIT AND INSTALL BARREL BUSHING ON 1911 AUTO
BEVEL MAGAZINE WELL OF 1911 AUTO
OPEN AND MODIFY EJECTION PORT OF 1911 AUTO
SLIDE
THROAT. POLISH BARREL AND FEED RAMP OF 1911
FIT NEW TRIGGER TO 1911
FIT CUSTOM HAMMER TO 1911
MODIFY 1911 AUTO FRAME FOR BEAVER TAIL
MAGNA-PORT (STD 2 TRAPEZOID)
MAGNA PORT DUAL TRAPEZOID
OTHER HANDGUN WORK
$60.00
$50.00
$40.00-$100.00
$40.00
$50.00
$35.00
$100.00
$175.00
$25.00
$100.00
$100.00
$75.00
$50.00
$250.00
$50.00 AND UP
$25.00
POR
$50.00
$60.00
$100.00+UP
$75.00+UP
$100.00
$75.00
$30.00+BLUING
$45.00
$50.00
$35.00
$75.00
$100.00+UP
$85.00+BLUING
$150.00
$35.00
$50.00+BLUING
$50.00
$50.00
$50.00
$85.00
$125.00+BLUING
$175.00
$200.00
POR
$50.00
$40.00-$100.00
$40.00
$50.00
$35.00
$100.00
$175.00
$25.00
$100.00
$100.00
$75.00
$50.00
$250.00
$50.00 AND UP
$25.00
POR
$50.00
$60.00
$100.00+UP
$75.00+UP
$100.00
$75.00
$30.00+BLUING
$45.00
$50.00
$35.00
$75.00
$100.00+UP
$85.00+BLUING
$150.00
$35.00
$50.00+BLUING
$50.00
$50.00
$50.00
$85.00
$125.00+BLUING
$175.00
$200.00
POR
(WILL DEPEND ON INDIVIDUAL HANDGUN)
INSTALL EXTENDED SLIDE SAFETY
STOCK WORK (LABOR ONLY)
REFINISH STOCK-UNFILLED OIL FINISH
SAME FINISH ON COMPLEX STOCK
GLASS BEDDING BARREL AND ACTION,
HUNTING RIFLE
GLASS BED-M-I GARAND ETC.
INSTALL RECOIL PAD
INSTALL ADJUSTABLE BUTT PLATE
INSTALL SLING SWIVELS
INSTALL STOCK CROSS BOLT (REINFORCING
SCREW)
INSTALL RECOIL REDUCER
(SIMPLE BUTT STOCK INSTALLATION)
INLETTING SEMI-FINISHED WOOD STOCK
FIT AND INSTALL BARRELED ACTION IN PRE
FINISHED SYNTHETIC STOCK
INSTALL ADJUSTABLE COMB HARDWARE
SHORTEN STOCK
FREE FLOAT BARREL
INSTALL EXTENDED SLIDE SAFETY
STOCK WORK (LABOR ONLY)
REFINISH STOCK-UNFILLED OIL FINISH
SAME FINISH ON COMPLEX STOCK
GLASS BEDDING BARREL AND ACTION,
HUNTING RIFLE
GLASS BED-M-I GARAND ETC.
INSTALL RECOIL PAD
INSTALL ADJUSTABLE BUTT PLATE
INSTALL SLING SWIVELS
INSTALL STOCK CROSS BOLT (REINFORCING
SCREW)
INSTALL RECOIL REDUCER
(SIMPLE BUTT STOCK INSTALLATION)
INLETTING SEMI-FINISHED WOOD STOCK
FIT AND INSTALL BARRELED ACTION IN PRE
FINISHED SYNTHETIC STOCK
INSTALL ADJUSTABLE COMB HARDWARE
SHORTEN STOCK
FREE FLOAT BARREL
$45.00
$75.00
$100.00
$75.00
$100.00
$35.00
$75.00
$25.00
$25.00+UP
$35.00
$150.00
$50.00
$125.00
$25.00
$25.00+UP
$75.00
$100.00
$75.00
$100.00
$35.00
$75.00
$25.00
$25.00+UP
$35.00
$150.00
$50.00
$125.00
$25.00
$25.00+UP